Pivot, type P12

The  P12 pivot is a bi-metal construction. The body is constructed from Brass, whilst the tip is made of highly polished Iridium or Tungsten Carbide. The pivot is manufactured to close tolerance to enable it to give good service in its working environment.

A typical application for this pivot is in scientific instruments and compasses.  

P12 PIVOT DIMENSIONS 

Overall length 11mm
Thread size 10BA or M1.6
Angle of tip 50 (+/- 2)
Tip Radius 0.1mm
Stem angle 20 (+/- 2)
Diameter at the base of the 50 cone 0.35mm
Chamfer on Thread 45

Note:  If the dimensions are not suitable for your application, then the Pivot can be modified to suit your requirements.

Copyright True Point (UK) Ltd